Free template · Australia · Updated November 2026
Air conditioning installation SWMS template
Installing air conditioning usually involves high risk construction work: work on refrigerant lines, near energised electrical services, and often at height on roofs or walls. This one covers the site survey, lifting units, wall penetrations, ceiling spaces, brazing, electrical connection, refrigerant handling and commissioning. Edit it and download it.
Free, no sign-up. The download adds a worker sign-on table and principal contractor approval.
The air conditioning SWMS
8 job steps, from set-up to pack-down. Every step lists its hazards, risk before and after, and the controls.
- Work activity
- Installation of split system and ducted air conditioning in an existing building, including lifting units, wall penetrations, pipework, refrigerant handling and electrical connection.
- High risk construction work
-
- Risk of a fall of more than 2 metres
- On or near chemical, fuel or refrigerant lines
- On or near energised electrical installations
- PPE
- Safety glasses, Hearing protection, Steel-cap boots, Work gloves, Insulated gloves (rated), P2 respirator, Fall-arrest harness, Sun protection (hat, long sleeves, SPF 50+)
- Plant and equipment
- Core drill with dust extraction
- Oxy-acetylene or air-acetylene brazing kit, dry nitrogen
- Vacuum pump, gauges, recovery unit
- Lifting aids, platform ladders, EWP or scaffold for high units
- Voltage tester and lock-out kit
- Licences and training
- General construction induction (White Card)
- ARC refrigerant handling licence
- Electrical licence (or restricted licence) for the state
- Working at heights training
| # | Job step | Hazards | Risk | Control measures | Residual | Responsible |
|---|---|---|---|---|---|---|
| 1 | Survey the site |
| Medium |
| Low | Supervisor |
| 2 | Lift and position units |
| High |
| Medium | All workers |
| 3 | Drill wall penetrations |
| Medium |
| Low | All workers |
| 4 | Work in ceiling and roof spaces |
| High |
| Medium | All workers |
| 5 | Braze pipework |
| High |
| Low | Licensed technician |
| 6 | Connect electrical supply |
| High |
| Low | Licensed electrician |
| 7 | Pressure test, evacuate and charge |
| High |
| Low | Licensed technician |
| 8 | Commission and clean up |
| Low |
| Low | Licensed technician |
Rules that apply to air conditioning work
- Anyone handling refrigerant needs a refrigerant handling licence from the Australian Refrigeration Council (ARC). Recover refrigerant, never vent it.
- Electrical connection must be done by someone licensed for that work in your state.
- Purge with dry nitrogen while brazing, and ventilate: nitrogen and refrigerant can displace oxygen in small spaces.
- Outdoor units on roofs or walls above 2 metres need fall protection.
Questions
Do air conditioning installers need a SWMS?
What licence do I need to handle refrigerant?
Can an air conditioning installer do the electrical connection?
Is this air conditioning SWMS free to use?
More SWMS templates
- Working at heights
- Electrical
- Carpentry
- Plumbing
- Solar installation
- Roofing
- Scaffolding
- Concreting
- Excavation
- Demolition
- Painting
- Tiling
- Landscaping
- Builders clean
- Pest control
By state: SWMS template NSW · SWMS template QLD · SWMS template VIC · SWMS template WA · SWMS template SA · Blank SWMS template
Attach the SWMS to every job
Fieldmox runs quotes, scheduling, the technician app and invoicing in one place. Save the SWMS on the job next to the quote and photos, so it's there when the builder asks for it, and add "SWMS read and signed" to the visit checklist your crew ticks off on their phone before they start.
Book a meeting