Fieldmox by Heffl

Free template · New South Wales · Updated November 2026

SWMS template for NSW

In NSW, a SWMS is required before any high risk construction work starts, under the Work Health and Safety Regulation (NSW). It must name the high risk work, the hazards and risks, the control measures, and how those controls are put in place, monitored and reviewed. Use the free builder below, or start from a trade example.

Fill in your NSW SWMS

Start blank or from a trade example, then download Word or PDF. Free, no sign-up.

Free, no sign-up. Your draft saves in this browser as you type.

1. Business and job details
2. High risk construction work

Tick every category the job involves. If none apply, a SWMS isn't legally required, but many builders still ask for one.

3. PPE, plant, licences and emergency
4. Job steps, hazards and controls

One row per step, in the order the work is done. Put each hazard and each control on its own line.

    5. Monitoring and review

    The download adds a worker sign-on table and an approval block for the principal contractor.

    SWMS law in New South Wales

    Act
    Work Health and Safety Act 2011 (NSW)
    Regulation
    Work Health and Safety Regulation (NSW)
    Regulator
    SafeWork NSW
    Regulator's own template
    SafeWork NSW SWMS template (Template 5)

    What to know in NSW

    • NSW follows the national model WHS laws, so the 18 high risk construction work categories and the SWMS content rules are the same as in Queensland, WA and SA.
    • The principal contractor must take reasonable steps to get a copy of your SWMS before the work starts, so builders will ask for it at induction.
    • SafeWork NSW publishes its own SWMS template as part of the Housing Industry Site Safety Pack (Template 5).

    Work that needs a SWMS in NSW

    New South Wales uses the national list of 18 types of high risk construction work. A SWMS is required before any of them starts.

    1. 1 Risk of a fall of more than 2 metres
    2. 2 Work on a telecommunication tower
    3. 3 Demolition of load-bearing or structural elements
    4. 4 Disturbing asbestos
    5. 5 Structural alterations needing temporary support
    6. 6 In or near a confined space
    7. 7 Shaft or trench deeper than 1.5 m, or a tunnel
    8. 8 Use of explosives
    9. 9 On or near pressurised gas mains or piping
    10. 10 On or near chemical, fuel or refrigerant lines
    11. 11 On or near energised electrical installations
    12. 12 Contaminated or flammable atmosphere
    13. 13 Tilt-up or precast concrete
    14. 14 On or next to a road, railway or shipping lane in use
    15. 15 Where powered mobile plant is moving
    16. 16 Artificial extremes of temperature
    17. 17 In or near water with a risk of drowning
    18. 18 Diving work

    What a SWMS must include, how to fill it in, and a worked example: the full SWMS guide.

    SWMS questions for NSW

    Is a SWMS a legal requirement in NSW?
    Yes, for high risk construction work. Under the NSW WHS Regulation, the business doing the work must prepare a SWMS (or make sure one has been prepared) before the work starts, and make sure the work follows it.
    Does SafeWork NSW have a free SWMS template?
    Yes. SafeWork NSW publishes a SWMS template in Word and PDF as Template 5 of its Housing Industry Site Safety Pack. The builder on this page covers the same content and adds trade examples you can edit online.
    How long do I keep a SWMS in NSW?
    Until the high risk construction work it covers is finished. If a notifiable incident happens during that work, keep it for at least 2 years after the incident.

    Attach the SWMS to every job

    Fieldmox runs quotes, scheduling, the technician app and invoicing in one place. Save the SWMS on the job next to the quote and photos, so it's there when the builder asks for it, and add "SWMS read and signed" to the visit checklist your crew ticks off on their phone before they start.

    Book a meeting