Fieldmox by Heffl

Free template · Australia · Updated November 2026

Pest control SWMS template

Most pest control isn't high risk construction work, so a SWMS isn't legally required. Builders, strata and facility managers often ask for one anyway, especially for termite work on building sites. This one covers the inspection, roof voids, subfloors, mixing and applying pesticides, termite treatment, baits and storage. Edit it and download it.

Edit it online

Free, no sign-up. The download adds a worker sign-on table and principal contractor approval.

The pest control SWMS

7 job steps, from set-up to pack-down. Every step lists its hazards, risk before and after, and the controls.

Work activity
General pest and termite treatment at residential and commercial properties, including roof void and subfloor inspection, spraying, baiting and termite chemical barriers.
High risk construction work
None by default. Tick any that apply on your job.
PPE
Safety glasses, Steel-cap boots, Chemical-resistant gloves, P2 respirator, Sun protection (hat, long sleeves, SPF 50+), Coveralls, Knee pads
Plant and equipment
  • Backpack and power sprayers
  • Duster and bait stations
  • Hammer drill with dust extraction (termite drilling)
  • Torch, moisture meter, thermal camera
  • Vehicle chemical cabinet and spill kit
Licences and training
  • Pest management licence for the state
  • General construction induction (White Card) for building sites
  • First aid (current)
Job steps, hazards, risk ratings and control measures
# Job step Hazards Risk Control measures Residual Responsible
1 Inspect and talk to the client
  • Sensitive occupants (babies, asthma, pregnancy)
  • Pets, fish ponds and food areas
  • Aggressive dogs
Medium
  • Ask about sensitive occupants and pets before treating
  • Agree which areas will be treated and how long to stay out
  • Ask for dogs to be secured before entering the yard
  • Every worker reads and signs this SWMS
Low Technician
2 Inspect roof voids
  • Heat stress
  • Falling through the ceiling
  • Live electrical cables
  • Insulation fibres and possible asbestos
High
  • Inspect early in the day and limit time in hot roof spaces
  • Step only on joists or crawl boards
  • Don't touch cables; avoid damaged wiring
  • Wear a P2 respirator; tell someone when you go in
Medium Technician
3 Inspect subfloors
  • Tight, low spaces
  • Spiders, snakes and vermin
  • Sharp objects and nails
  • Poor air
Medium
  • Check access and air before going in; don't enter flooded or very tight spaces
  • Wear coveralls, gloves and a torch; tell someone when you go in
Low Technician
4 Mix and apply pesticides
  • Skin and eye contact
  • Inhalation
  • Spray drift onto people, pets and water
High
  • Mix outdoors at the vehicle, following the label rate
  • Wear the PPE the label and SDS set
  • Don't spray in wind or near ponds and food
  • Keep people and pets out until the re-entry time has passed
Low Technician
5 Termite treatment and slab drilling
  • Silica dust
  • Drilling into services in slabs and walls
  • Noise
High
  • Scan for services and check plans before drilling
  • Use a drill with dust extraction; wear a P2 respirator and hearing protection
  • Seal drill holes after treatment
Low Technician
6 Place baits and rodenticides
  • Children and pets reaching baits
  • Secondary poisoning of wildlife
Medium
  • Use tamper-resistant bait stations, secured in place
  • Record where each bait is placed and tell the client
Low Technician
7 Store and transport chemicals
  • Spills in the vehicle
  • Fire
  • Theft
Medium
  • Keep chemicals in a locked, ventilated cabinet separate from the cab
  • Carry a spill kit and the SDS for every product
  • Triple-rinse empty containers before disposal
Low Technician

Rules that apply to pest control work

  • Pest control work needs a pest management licence from your state (for example, from the EPA or the health department, depending on the state).
  • Read the label and safety data sheet (SDS) for every product, and follow the PPE and re-entry times they set.
  • Drilling slabs for termite treatment releases silica dust and can hit services. Scan first and use extraction.
  • Never enter a roof void or subfloor without telling someone, and limit time in hot roof spaces.

Questions

Do pest controllers need a SWMS?
Not usually by law, because most pest control isn't high risk construction work. You'll still be asked for one by builders (pre-construction termite barriers), strata managers and facility managers, and it's a quick way to show you've thought about roof voids, chemicals and dust.
What should a pest control risk assessment cover?
Sensitive occupants and pets, roof voids and subfloors, pesticide mixing and spraying, drilling for termite treatments, baits, and chemical storage in the vehicle. Follow each product's label and SDS for PPE and re-entry times.
Who licenses pest controllers in Australia?
Each state does. Depending on the state, it's the environment protection authority or the health department. You need the licence for the state where you work.
Is this pest control SWMS free to use?
Yes. Download it as Word or PDF with no sign-up, or open it in the online builder to change the steps and add your business details first. Check it against your own job and site before you use it.

Attach the SWMS to every job

Fieldmox runs quotes, scheduling, the technician app and invoicing in one place. Save the SWMS on the job next to the quote and photos, so it's there when the builder asks for it, and add "SWMS read and signed" to the visit checklist your crew ticks off on their phone before they start.

Book a meeting