Fieldmox by Heffl

Free template · Word & PDF · Updated November 2026

Electrical contract template

An electrical contract sets out the work, the price, permits and inspections, who supplies fixtures, and what happens if you find wiring that has to be brought up to code. This one is filled in for a typical panel upgrade with a few new circuits. Edit it below and download it as Word or PDF, free and with no sign-up.

Edit it online

Free, no sign-up. Also called a electrical service contract, electrician contract, electrical service agreement.

The electrical contract

The whole contract, exactly as it downloads. The blank lines are for your business and your client's details; fill them in online or after you download.

Electrical Services Contract

This agreement is between the Contractor and the Client named below. It starts on  .

1. Parties

Contractor
 
 
Phone:  
Email:  
Client
 
 
Phone:  
Email:  

2. Property and term

Service address 
Start date 
TermWork starts on the start date and is expected to take 2 working days, plus inspection and utility reconnection. Permit, inspection or utility scheduling and hidden conditions may move the schedule.

3. Services and price

ServiceHow oftenPrice
Replace 100A panel with new 200A panel and breakersOne time$3,200
Upgrade service entrance and meter base to 200A (utility coordination included)One time$1,600
Add 2 new 20A kitchen circuits with GFCI protectionOne time$900
Install 6 recessed lights on a new dimmer (fixtures supplied by Contractor)One time$1,080
Permit and inspectionOne time$300

Included:

  • Licensed electrician on site for all work
  • Wire, boxes, breakers and connectors
  • Pulling the permit and attending inspections
  • Coordinating disconnect and reconnect with the utility
  • Labeling the new panel
  • Cleaning up the work area

Not included (quoted separately if the Client asks for it):

  • Drywall patching and painting after wire is fished
  • Fixtures supplied by the Client
  • Code upgrades outside the work area (quoted before starting)
  • Utility fees charged directly to the Client
  • Trenching or work on underground service
  • Low-voltage, data and security wiring

4. Payment

Billing30% deposit on signing, 50% when the panel is installed, 20% after final inspection
Payment dueEach payment due on the milestone
Payment methodsCard, bank transfer (ACH) or check
Deposit30% deposit, or the maximum your state allows if lower
Late payment1.5% per month on balances more than 30 days overdue

If an invoice is more than 30 days overdue, the Contractor may pause services until it is paid.

5. Ending the agreement

The Client may cancel before work starts and get the deposit back, less permit fees paid and equipment ordered that can't be returned. After work starts, the Client pays for work done and materials used. For contracts signed at the Client's home, federal and state rules may give the Client a short window to cancel (the FTC cooling-off rule gives 3 business days for many sales made at the home).

Either party may end the agreement straight away if the other seriously breaks it and doesn't fix the problem within 7 days of being told in writing.

6. Other terms

6.1 License, permits and inspection. All work is done or supervised by an electrician licensed in the state and follows the electrical code adopted locally. The Contractor will pull required permits and arrange inspections. The work is complete when it passes final inspection.

6.2 Code upgrades and hidden conditions. If existing wiring is unsafe or the inspector requires upgrades beyond this scope, the Contractor will explain what's needed and the price. That work is only done with the Client's written approval.

6.3 Power outages. Power to part or all of the building will be off during parts of the work. The Contractor will tell the Client in advance. The Contractor can't control the utility's schedule for disconnects and reconnects.

6.4 Client-supplied fixtures. If the Client supplies fixtures, they must be on site and listed for their use (for example, UL listed). The Contractor's warranty covers the installation, not those products.

6.5 Workmanship warranty. The Contractor will fix faults caused by its workmanship reported within 1 year of completion, at no charge.

6.6 Change orders. Any change to the scope or price is agreed in writing (email is fine) before the work is done.

6.7 Access. The Client will give the Contractor safe access to the areas being serviced on the scheduled day, including unlocked gates, codes or keys where needed, and will keep pets secured. If the Contractor can't get access, the visit may be charged as completed.

6.8 Damage. The Contractor will repair or pay for damage caused by its negligence. The Client must report any damage within 48 hours of the visit, with photos where possible. The Contractor is not responsible for damage to items that were hidden, unmarked or already faulty.

6.9 Insurance. The Contractor carries general liability insurance and, where the law requires it, workers' compensation insurance, and will provide proof on request.

6.10 Independent contractor. The Contractor is an independent business, not an employee of the Client. The Contractor supplies its own equipment and decides how the work is done, and is responsible for its own taxes and staff.

6.11 Disputes. Both parties will try to settle any dispute by talking first. If that fails, either party may take it to small claims court or mediation in the county where the services are performed. This agreement is governed by the laws of the state where the services are performed.

6.12 Entire agreement. This document is the whole agreement between the parties. Any change must be in writing (email is fine) and accepted by both. If one part of the agreement can't be enforced, the rest still applies.

7. Signatures

By signing, both parties agree to the terms above.

NameSignatureDate
Contractor 
Client 
Edit it online

What to put in a electrical contract

  1. 01

    List circuits and devices

    Name the panel size, each new circuit and every device or fixture location. "Rewire kitchen" means different things to different people.

  2. 02

    Include permits and inspection

    Panel changes, new circuits and service upgrades almost always need a permit. Say you'll pull it, that it's in the price, and that the job is done when it passes inspection.

  3. 03

    Plan for code upgrades

    Opening an old system often means the inspector wants more: AFCI or GFCI protection, grounding, bonding. Agree that required upgrades found during the work are priced and approved before you do them.

  4. 04

    Cover the utility

    Service upgrades need the utility to disconnect and reconnect. Say you'll coordinate it but can't control the utility's schedule, and that power will be off for part of the day.

  5. 05

    Exclude patching

    Fishing wire means holes in drywall. Say whether you patch them or leave them for the client's painter.

Not sure what to put in the price column? See how much to charge for electrical .

Questions

What should an electrical contract include?
Both parties and the address, the exact scope (panel, circuits, devices), who supplies fixtures, the price and payment schedule, permits and inspection, how code upgrades and hidden problems are handled, power outage notice, what's not included, your warranty, cancellation terms and signatures.
Does electrical work need a permit?
Most new circuits, panel changes and service upgrades do. Like-for-like swaps of a light fixture or outlet often don't, but it depends on your city or county. Check with the local building department.
How much deposit should an electrician take?
Commonly 10% to 50% to cover equipment and materials, with the rest at milestones or completion. Some states cap deposits on home improvement work, so check your state's rules.
Who pays for code upgrades an inspector asks for?
Usually the client, because they're part of making the building safe and weren't in the original scope. That's why the contract should say upgrades will be priced and approved in writing before they're done.
Is this electrical contract template free?
Yes. Download it as Word or PDF with no sign-up, or open it in the online builder to add your business and client details, change the services and prices, and edit any clause first.
Is this contract legally binding?
A contract is generally binding when both parties agree to clear terms and sign it. This template is a practical starting point, not legal advice: rules on deposits, cancellation rights, late fees and licensing vary by state, so check it against your state's rules, or have a local attorney review it, before you rely on it.

Run the job after the contract is signed

Fieldmox runs quotes, scheduling, the technician app and invoicing in one place. The signed contract sits on the job with the quote and photos, your crew sees the work on their phone, and the deposit and final invoice come from the same job.

Book a meeting