Free template · Word & PDF · Updated November 2026
HVAC service agreement template
An HVAC service agreement is a yearly maintenance plan: you tune up the heating and cooling equipment on a schedule, and the customer gets priority service and a discount on repairs. This one covers a spring AC and fall furnace tune-up, filters, what's not covered (parts, refrigerant, older equipment) and auto-renewal. Edit it below and download it as Word or PDF, free and with no sign-up.
Free, no sign-up. Also called a HVAC service contract, HVAC maintenance agreement, HVAC maintenance contract, heating and cooling maintenance plan.
The HVAC contract
The whole contract, exactly as it downloads. The blank lines are for your business and your client's details; fill them in online or after you download.
HVAC Maintenance Service Agreement
This agreement is between the Contractor and the Client named below. It starts on .
1. Parties
| Contractor Phone: Email: |
Client Phone: Email: |
2. Property and term
| Service address | |
| Start date | |
| Term | 12 months from the start date. It renews for another 12 months unless the Client cancels before the renewal date. The Contractor will send a reminder before it renews. |
3. Services and price
| Service | How often | Price |
|---|---|---|
| Spring cooling tune-up (AC or heat pump): clean condenser coil, check refrigerant pressures, test capacitor and contactor, clear condensate drain, check thermostat | Once a year, March to May | Included in plan |
| Fall heating tune-up (furnace): inspect heat exchanger and burners, test ignition and safety controls, check gas pressure and venting, measure carbon monoxide | Once a year, September to November | Included in plan |
| Standard 1-inch filter replacement | At each tune-up | Included in plan |
| Plan fee for 1 furnace and 1 AC system | Yearly | $19 per month or $199 per year |
Included:
- Two tune-up visits a year as described above
- Priority scheduling ahead of non-plan customers
- No overtime or weekend charge for plan customers
- 15% off repair labor and parts
- A written report on the condition of the equipment after each visit
Not included (quoted separately if the Client asks for it):
- Repair parts, refrigerant and labor beyond the tune-up
- Ductwork, air quality equipment and zoning systems
- Equipment not listed in this agreement
- Repairs caused by power surges, flooding, neglect or tampering
- Replacing equipment that is unsafe, beyond repair or has parts that are no longer available
- Specialty filters and media filters
4. Payment
| Billing | Charged monthly to the card on file, or yearly in advance |
| Payment due | On the billing date; repairs are due when the work is completed |
| Payment methods | Card on file, bank transfer (ACH) or check |
| Deposit | None |
| Late payment | Plan benefits are paused while a payment is more than 30 days overdue |
If an invoice is more than 30 days overdue, the Contractor may pause services until it is paid.
5. Ending the agreement
The Client may cancel at any time by giving written notice (email is fine). If the Client cancels after receiving a tune-up but before paying for a full year, the Contractor will bill the regular price of the visits received, less plan payments already made. The Contractor may cancel with 30 days' written notice and refund any prepaid amount for visits not yet performed.
Either party may end the agreement straight away if the other seriously breaks it and doesn't fix the problem within 7 days of being told in writing.
6. Other terms
6.1 Equipment covered. This agreement covers the equipment listed on the first service report. On the first visit the Contractor will note any existing problems. Equipment that needs repairs to be safe or serviceable must be repaired, at the Client's cost, before this agreement covers it.
6.2 Not a warranty. This is a maintenance agreement, not a warranty or insurance. It doesn't guarantee that the equipment won't fail. Manufacturer warranties stay with the manufacturer, and the Contractor will help with warranty claims where it can.
6.3 Repairs. The Contractor will give the Client a price and get approval before doing any repair. The plan discount applies to approved repairs while the plan is active and paid up.
6.4 Safety. If the Contractor finds a gas leak, carbon monoxide or another danger, it may shut off the equipment and tell the Client in writing. The Client agrees not to restart it until it's repaired.
6.5 Access. The Client will give the Contractor safe access to the areas being serviced on the scheduled day, including unlocked gates, codes or keys where needed, and will keep pets secured. If the Contractor can't get access, the visit may be charged as completed.
6.6 Changes to services or price. Extra work outside this agreement will be quoted and agreed before it is done. The Contractor may change prices with at least 30 days' written notice; the Client may end the agreement before the new price starts.
6.7 Damage. The Contractor will repair or pay for damage caused by its negligence. The Client must report any damage within 48 hours of the visit, with photos where possible. The Contractor is not responsible for damage to items that were hidden, unmarked or already faulty.
6.8 Insurance. The Contractor carries general liability insurance and, where the law requires it, workers' compensation insurance, and will provide proof on request.
6.9 Independent contractor. The Contractor is an independent business, not an employee of the Client. The Contractor supplies its own equipment and decides how the work is done, and is responsible for its own taxes and staff.
6.10 Disputes. Both parties will try to settle any dispute by talking first. If that fails, either party may take it to small claims court or mediation in the county where the services are performed. This agreement is governed by the laws of the state where the services are performed.
6.11 Entire agreement. This document is the whole agreement between the parties. Any change must be in writing (email is fine) and accepted by both. If one part of the agreement can't be enforced, the rest still applies.
7. Signatures
By signing, both parties agree to the terms above.
| Name | Signature | Date | |
|---|---|---|---|
| Contractor | |||
| Client |
What to put in a HVAC contract
-
01
List the equipment covered
Write down each unit by type, make, model and location (for example, one gas furnace and one 3-ton AC). Equipment added later needs a change to the agreement and price.
-
02
Spell out each tune-up
List the checklist for the cooling and heating visits: cleaning coils, checking refrigerant pressures, testing safety controls, checking the heat exchanger and so on. Customers buy the plan for the checklist, and it shows what they're paying for.
-
03
Say what members get
Priority scheduling, no overtime charge, a repair discount and waived diagnostic fees are the usual benefits. Put the exact discount and what it applies to in writing.
-
04
Be clear about what isn't covered
A maintenance plan isn't a warranty. Parts, refrigerant, ductwork, repairs from neglect or old age, and equipment that is unsafe or obsolete are billed separately. Say that up front so the first repair doesn't feel like a broken promise.
-
05
Set equipment condition at the start
Inspect the system on the first visit and note existing problems. Equipment that needs repairs to be safe or serviceable is fixed or excluded before the plan covers it.
-
06
Use auto-renewal and monthly billing
Most plans renew each year and many are billed monthly on a card. Say how renewal works and how to cancel, and check your state's rules on automatic renewal notices.
Not sure what to put in the price column? See how much to charge for HVAC .
Questions
What should an HVAC service agreement include?
How much should an HVAC maintenance agreement cost?
Is an HVAC maintenance plan the same as a warranty?
Why do HVAC companies sell service agreements?
Is this HVAC contract template free?
Is this contract legally binding?
Contract templates for other trades
- Lawn care contract
- Cleaning contract
- Commercial cleaning contract
- Landscaping contract
- Snow removal contract
- Pest control contract
- Pool service contract
- Handyman contract
- Roofing contract
- Painting contract
- Electrical contract
- Plumbing contract
- Pressure washing contract
- Tree service contract
Need something general? Start from a blank service agreement.
Turn the signed contract into scheduled visits
Fieldmox runs quotes, scheduling, the technician app and invoicing in one place. Set the contract up as a recurring job once: every visit lands on the schedule and your crew's phone, each one can be invoiced as it's done or monthly, and the signed contract sits on the job.
Book a meeting