Free calculator · Updated November 2026
How much to charge for electrical work
Most US electrical contractors charge $50 to $130 an hour, often plus a $100 to $200 service call fee. Typical flat prices are $120 to $200 to install an outlet and roughly $1,800 to $5,100 for a 200-amp panel upgrade. To set your own price, add up the paid hours including drive time, multiply by your electrician's pay plus payroll costs and overhead, add materials and permits, then divide by one minus your profit margin.
For electrical work business owners. Put in the job and your own costs, and get a price that pays your team, covers overhead and leaves a profit.
Electrical work price calculator
Suggested price
$227
Service and repair, by the hour, 2 hours
Your minimum charge applies.
- Time on site
- 2 hr
- Paid hours
- 2 hr 30 min
- Labor
- $106
- Overhead
- $75
- Materials
- $0
- Profit
- $46
- Per hour
- $114
- Your hourly rate
- $91
Typical US price for this job: $50–$130 per hour, so $100–$260 for 2 hours.
"Your hourly rate" is what to quote per electrician-hour for hourly work: pay, payroll costs and overhead, plus your margin.
Electrical work prices by job size
Calculated with the defaults above: $30 an hour pay, 40% payroll costs, $30 overhead per paid hour, a 20% profit margin and a $150 minimum. That works out to $91 per electrician-hour. Pay more than the median, or work in a high-cost city, and your prices go up.
| Size | Price | Per hour |
|---|---|---|
| 1 hour | $150 (minimum) | $150 |
| 2 hours | $227 | $114 |
| 3 hours | $317 | $106 |
| 4 hours | $408 | $102 |
| 6 hours | $589 | $98 |
| 8 hours | $771 | $96 |
| Size | Price | Per device |
|---|---|---|
| 1 device | $150 (minimum) | $150 |
| 2 devices | $184 | $92 |
| 4 devices | $299 | $75 |
| 6 devices | $415 | $69 |
| 10 devices | $646 | $65 |
| Size | Price | Per panel |
|---|---|---|
| 1 panel | $2,099 | $2,099 |
| 2 panels | $3,687 | $1,844 |
Pricing tips for electrical work
- Charge a service call fee or a minimum of one to four hours, so small jobs still pay for the drive.
- Flat-rate routine work like outlets, switches, fixtures and panel swaps. Hourly suits troubleshooting, where you cannot know the cause until you look.
- Price permits and inspections as their own line. Housecall Pro puts permits at $75 to $150 each and inspections at $100 to $125.
- Add $100 to $200, or 1.5 to 2 times the regular rate, for emergency and after-hours calls.
- Your apprentice, journeyman and master rates should differ. Housecall Pro lists about $40 to $60, $60 to $90 and $90 to $120 an hour.
How the calculator works
- Paid hours = time on the job (size × time per hour, plus setup) + drive time for every electrician.
- Labor = paid hours × pay × (1 + payroll taxes and insurance).
- Overhead = paid hours × your overhead per hour.
- Price = (labor + overhead + materials) ÷ (1 − profit margin). It never goes below your minimum charge.
Default pay is the US median for Electricians (47-2111) from the Bureau of Labor Statistics. Market prices come from the sources below.
Our assumptions. No neutral source exists for these, so change them to match your business:
- Installing or replacing one outlet or switch takes 30 minutes (Housecall Pro) plus 15 minutes of setup per job. $10 per device is our pick between Fixr's $1 to $5 for a standard outlet and $10 to $20 for a GFCI.
- A 200-amp panel upgrade takes 12 worker-hours (Fixr: 4 to 8 hours with two electricians) plus 1 hour for the permit, utility coordination and inspection. $400 is the top of Fixr's $300 to $400 for the panel; $300 per job for breakers, fittings, wire and permit is our estimate.
- Overhead of $30 per billable hour and payroll costs of 40% (about $12 an hour on the median wage) follow Housecall Pro's worked example. A 20% margin follows the same example.
- Half an hour of round-trip driving per job.
Questions about electrical work prices
How much should I charge per hour as an electrician?
How much should an electrician charge for a service call?
How much should I charge to install an outlet or switch?
How much should I charge for a 200-amp panel upgrade?
Should electricians charge flat rate or hourly?
Is the BLS wage what I should charge?
Sources
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics: Electricians (47-2111), May 2025 data
Default wage: $30.38 an hour, the national median. This is what you pay an employed electrician, not the owner's rate.
- Housecall Pro, How to Price Electrical Work (updated October 2026)
Rates $50 to $130 an hour; apprentice $40 to $60, journeyman $60 to $90, master $90 to $120; service call $100 to $200 or a one to four hour minimum; 200-amp load center $2,250 to $5,100; outlet replacement about 30 minutes; permits $75 to $150; worked example with $30 an hour overhead, $12 an hour burden and a 20% margin.
- Fixr, Electrician Cost (updated January 2025)
Electricians charge $70 to $131 an hour; a typical visit costs $176 to $327.
- Fixr, Electrical Outlet Installation Cost (updated August 2025)
Outlet installation $120 to $200, $141 average; standard outlet $1 to $5, GFCI $10 to $20 in materials.
- Fixr, Electrical Panel Upgrade Cost (updated January 2025)
200-amp upgrade $1,800 to $4,500, about $3,000 typical; 4 to 8 hours with two electricians; panel $300 to $400.
- This Old House, Electrician Cost (updated June 2026)
Electricians charge $40 to $120 an hour; light switch install $85 to $200; GFCI outlet $120 to $200; panel upgrade $1,300 to $3,000; minimums of one to four hours.
From price to paid, in one place
Fieldmox turns your price into a quote, schedules the job once the customer says yes, gives your team the day's work on their phone and invoices it when it's done.
Book a meeting