Fieldmox by Heffl

Free calculator · Updated November 2026

How much to charge for plumbing

Most US plumbing companies charge $75 to $150 an hour, with $90 a common national average, plus a service call fee of $50 to $250. Typical flat prices are $150 to $310 to clear a kitchen sink line and about $900 to $2,900 to install a tank water heater. To set your own price, add up the paid hours including drive time, multiply by your tech's pay plus payroll costs and overhead, add parts, then divide by one minus your profit margin.

For plumbing business owners. Put in the job and your own costs, and get a price that pays your team, covers overhead and leaves a profit.

Plumbing price calculator

The job
Service
Your numbers

Suggested price

$307

Service and repair, by the hour, 2 hours

Time on site
2 hr
Paid hours
2 hr 30 min
Labor
$96
Overhead
$150
Materials
$0
Profit
$61
Per hour
$154
Your hourly rate
$123

Typical US price for this job: $75–$150 per hour, so $150–$300 for 2 hours.

"Your hourly rate" is what to quote per plumber-hour for hourly work: pay, payroll costs and overhead, plus your margin.

Plumbing prices by job size

Calculated with the defaults above: $31 an hour pay, 25% payroll costs, $60 overhead per paid hour, a 20% profit margin and a $150 minimum. That works out to $123 per plumber-hour. Pay more than the median, or work in a high-cost city, and your prices go up.

Service and repair, by the hour Market: $75–$150 per hour
Size Price Per hour
1 hour $184 $184
2 hours $307 $154
3 hours $430 $143
4 hours $553 $138
6 hours $799 $133
8 hours $1,045 $131
Drain clearing Market: $150–$310 a job
Size Price Per drain
1 drain $234 $234
2 drains $376 $188
3 drains $517 $172
4 drains $659 $165
Water heater replacement (50-gallon tank) Market: $900–$2,867 a job
Size Price Per water heater
1 water heater $1,742 $1,742
2 water heaters $3,235 $1,618

Pricing tips for plumbing

  • Charge a service call or diagnostic fee and say whether it comes off the repair. Housecall Pro lists residential diagnostics at $79 to $180.
  • Use flat prices for routine single-visit jobs like drain clearing, toilet repairs and water heater swaps, and bill hourly for diagnostics and unclear scopes.
  • Mark up parts and equipment to cover sourcing, handling and callbacks, not just the purchase price.
  • Charge 1.5 to 3 times your standard rate for after-hours and holiday calls.
  • Your overhead per billable hour is often higher than you think. Divide a full year of truck, insurance, office, software and marketing costs by the hours you actually bill.

How the calculator works

  1. Paid hours = time on the job (size × time per hour, plus setup) + drive time for every plumber.
  2. Labor = paid hours × pay × (1 + payroll taxes and insurance).
  3. Overhead = paid hours × your overhead per hour.
  4. Price = (labor + overhead + materials) ÷ (1 − profit margin). It never goes below your minimum charge.

Default pay is the US median for Plumbers, Pipefitters, and Steamfitters (47-2152) from the Bureau of Labor Statistics. Market prices come from the sources below.

Our assumptions. No neutral source exists for these, so change them to match your business:

  • Clearing one drain takes 1 tech-hour plus 15 minutes of setup, with $15 of consumables. Fixr notes some plumbers flat-rate jobs under an hour, such as $150 to unclog a drain.
  • Replacing a 50-gallon tank takes 3 tech-hours (Fixr: 2 to 4 hours) plus 30 minutes of setup. Equipment and parts at $900 per heater is our estimate from Fixr's $1,800 average installed cost and its note that labor is 20% to 50% of the total. Haul-away and permit at $100 per job is our pick within Fixr's $50 to $150 disposal range.
  • Payroll costs of 25%, overhead of $60 per billable hour and a 20% margin follow Housecall Pro's worked example. Your own numbers will differ.
  • Half an hour of round-trip driving per job.

Questions about plumbing prices

How much should I charge per hour as a plumber?
Most US plumbers charge $75 to $150 an hour, and Fixr gives $90 as a national average. Journeymen run about $45 to $90 and master plumbers $70 to $200. If you pay a tech the $30.67 median wage, add 25% payroll costs and $60 an hour of overhead, then a 20% margin needs about $123 per billable hour. That figure is your floor, not the owner's take-home rate.
How much is a typical plumbing service call fee?
Fixr puts an initial service call at $50 to $300, and Housecall Pro lists residential diagnostic fees at $79 to $180, rising to $149 to $259 for emergencies. Many plumbers credit the fee against the repair if the customer goes ahead. Either way, the fee should at least cover the drive and the first part of an hour on site.
Should plumbers charge flat rate or hourly?
Most shops mix the two. Flat rates work for routine single-visit jobs like drain clearing, faucet installs and water heater replacements, because customers can say yes without worrying about the clock. Hourly billing suits diagnostics, leak hunting and jobs where the scope is unclear. Build flat rates from the hours the job really takes, so they still cover labor on a slow day.
How much should I charge to clear a drain?
Housecall Pro data puts clearing a kitchen sink line at $150 to $310, with a median of $225, and a tub or shower drain at $135 to $295. Fixr lists $100 to $500 to unclog a drain and $350 to $650 for a main sewer line. Charge more for main lines, hydro jetting and camera inspections.
How much should I charge to install a water heater?
Fixr puts a 50-gallon tank installed at $900 to $2,500, about $1,800 on average, and says a standard replacement takes 2 to 4 hours. Housecall Pro data has electric installs at $1,680 to $2,867. Price the unit, fittings, haul-away and any permit separately from labor, then apply your margin to the whole job.
How much more should I charge for emergency plumbing?
Most plumbers charge 1.5 to 3 times their standard rate for after-hours, weekend and holiday work, according to Housecall Pro, or a flat emergency call fee of about $150 to $350 plus the repair. Set the premium high enough to pay the tech's overtime and still make your margin.

Sources

From price to paid, in one place

Fieldmox turns your price into a quote, schedules the job once the customer says yes, gives your team the day's work on their phone and invoices it when it's done.

Book a meeting