Free calculator · Updated November 2026
How much to charge for pest control
Most US pest control companies charge $100 to $300 per visit on a quarterly plan, $40 to $75 per visit on a monthly plan, and $150 to $300 for the first visit of a plan. One-time treatments for common household pests run about $158 to $288. To set your own price, add your technician's time (with drive time and payroll costs), overhead and chemicals, then divide by 1 minus the profit margin you want.
For pest control business owners. Put in the job and your own costs, and get a price that pays your team, covers overhead and leaves a profit.
Pest control price calculator
Suggested price
$118
Quarterly general pest service, 2,000 sq ft
Your minimum charge applies.
- Time on site
- 51 min
- Paid hours
- 1 hr 12 min
- Labor
- $31
- Overhead
- $48
- Materials
- $15
- Profit
- $24
- Per sq ft
- $0.06
- Your hourly rate
- $83
Typical US price for this job: $100–$300 for a typical job.
"Your hourly rate" is what to quote per technician-hour for hourly work: pay, payroll costs and overhead, plus your margin.
Pest control prices by job size
Calculated with the defaults above: $22 an hour pay, 20% payroll costs, $40 overhead per paid hour, a 20% profit margin and a $50 minimum. That works out to $83 per technician-hour. Pay more than the median, or work in a high-cost city, and your prices go up.
| Size | Price | Per sq ft |
|---|---|---|
| 1,000 sq ft | $93 | $0.09 |
| 1,500 sq ft | $106 | $0.07 |
| 2,000 sq ft | $118 | $0.06 |
| 2,500 sq ft | $130 | $0.05 |
| 3,000 sq ft | $143 | $0.05 |
| 4,000 sq ft | $167 | $0.04 |
| Size | Price | Per sq ft |
|---|---|---|
| 1,000 sq ft | $61 | $0.06 |
| 1,500 sq ft | $65 | $0.04 |
| 2,000 sq ft | $69 | $0.03 |
| 2,500 sq ft | $74 | $0.03 |
| 3,000 sq ft | $78 | $0.03 |
| 4,000 sq ft | $86 | $0.02 |
| Size | Price | Per sq ft |
|---|---|---|
| 1,000 sq ft | $155 | $0.15 |
| 1,500 sq ft | $176 | $0.12 |
| 2,000 sq ft | $197 | $0.10 |
| 2,500 sq ft | $217 | $0.09 |
| 3,000 sq ft | $238 | $0.08 |
| 4,000 sq ft | $279 | $0.07 |
| Size | Price | Per sq ft |
|---|---|---|
| 1,000 sq ft | $170 | $0.17 |
| 1,500 sq ft | $195 | $0.13 |
| 2,000 sq ft | $219 | $0.11 |
| 2,500 sq ft | $244 | $0.10 |
| 3,000 sq ft | $269 | $0.09 |
| 4,000 sq ft | $319 | $0.08 |
Pricing tips for pest control
- Price the first visit of a plan higher than the visits after it. It takes longer and uses more product, and HomeGuide and Angi both put it at $150 to $300.
- Sell plans, not one-off sprays. A quarterly customer pays less per visit but is worth far more over a year, and route density cuts your drive time.
- Quote specialty pests (bed bugs, termites, rodents, wildlife) as separate jobs. Their labor and product costs are nothing like a general service.
- Price add-ons like bait stations, wasp nests and exclusion work from the time they take at your hourly rate, then round to a flat price your techs can quote on site.
- Check your real revenue per tech-hour every month. If routine visits run long, the visit price is too low, not the tech too slow.
How the calculator works
- Paid hours = time on the job (size × time per sq ft, plus setup) + drive time for every technician.
- Labor = paid hours × pay × (1 + payroll taxes and insurance).
- Overhead = paid hours × your overhead per hour.
- Price = (labor + overhead + materials) ÷ (1 − profit margin). It never goes below your minimum charge.
Default pay is the US median for Pest Control Workers (37-2021) from the Bureau of Labor Statistics. Market prices come from the sources below.
Our assumptions. No neutral source exists for these, so change them to match your business:
- Visit times are ours: about 45 minutes on site for a quarterly service on a 2,000 sq ft home, 25 minutes for a monthly service, about 1.5 hours for an initial service and 1.7 hours for a one-time treatment. Time your own techs and change them.
- Product cost per visit ($6 monthly, $15 quarterly, $35 initial, $40 one-time) is our estimate for a general pest treatment.
- Overhead of $40 per tech-hour (vehicle, fuel, equipment, licensing, insurance, software, office and marketing) is our estimate. Divide your own monthly overhead by your billable tech-hours.
- Payroll costs of 20% on top of wages (payroll taxes, workers' comp, insurance) are our estimate.
- The $50 minimum charge and 21 minutes of drive time per visit are ours.
Questions about pest control prices
How much should I charge for pest control?
Should I charge by the hour or a flat rate for pest control?
How much should the initial pest control visit cost?
Do recurring pest control customers pay less?
What profit margin should a pest control company aim for?
What affects the price of a pest control job?
Sources
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics: Pest Control Workers (37-2021), May 2025 data
Default wage: $21.75 an hour, the national median.
- HomeGuide, How Much Does Pest Control Cost? (January 2026)
Per visit: $40–$75 on a monthly plan, $100–$300 on a quarterly plan, $150–$300 for the initial visit of an ongoing service, $100–$600 for a one-time visit.
- Angi, Pest Control Cost (updated October 2026)
Quarterly visit $100–$300, monthly visit $40–$70, initial visit of ongoing service $150–$300; one-time visits $108–$261 for a 1,500 sq ft home; one-time service $350–$600 for 2,000 sq ft.
- Fixr, How Much Does It Cost To Hire An Exterminator? (updated January 2025)
One-time treatment for common household insects $158–$288; quarterly visits $98–$178; monthly visits $31–$56.
- Housecall Pro, Pest Control Prices (updated May 2026)
One-time residential service $100–$300; monthly plans $40–$80 per visit; hourly $75–$150 per technician for uncertain scopes; 15%–25% margins on standard residential services; pricing formula from labor, burden and overhead.
From price to paid, in one place
Fieldmox turns your price into a quote, schedules the job once the customer says yes, gives your team the day's work on their phone and invoices it when it's done.
Book a meeting