# SWMS Template WA (Free, Word & PDF, 2026) | Fieldmox

> Free SWMS template for WA under the WHS (General) Regulations 2022: all 18 high risk work categories and worker sign-on. Download Word or PDF.

Source: https://www.fieldmox.com/templates/swms/wa

1.  [Home](https://www.fieldmox.com/)
3.  [Templates](https://www.fieldmox.com/templates)
5.  [SWMS template](https://www.fieldmox.com/templates/swms)
7.  WA

Free template · Western Australia · Updated November 2026

# SWMS template for Western Australia

Western Australia moved to the national-model WHS laws in 2022, and its Work Health and Safety (General) Regulations 2022 require a SWMS before high risk construction work starts. The SWMS must identify the work, its hazards and risks, the control measures, and how they're implemented, monitored and reviewed. Use the free builder below.

[Fill it in online](#builder)

## Fill in your WA SWMS

Start blank or from a trade example, then download Word or PDF. Free, no sign-up.

Start from Blank SWMS Working at heights SWMS exampleElectrical SWMS exampleCarpentry SWMS examplePlumbing SWMS exampleAir conditioning SWMS exampleSolar installation SWMS exampleRoofing SWMS exampleScaffolding SWMS exampleConcreting SWMS exampleExcavation SWMS exampleDemolition SWMS examplePainting SWMS exampleTiling SWMS exampleLandscaping SWMS exampleBuilders clean SWMS examplePest control SWMS example Loads a filled-in example for that trade. Your business details are kept.

Download Word Save as PDF

Free, no sign-up. Your draft saves in this browser as you type.

1\. Business and job details

Business name  ABN  Business address  Business phone  Principal contractor  Site address  Supervisor responsible  Supervisor phone  Prepared by  Date prepared  Review date  Work activity

2\. High risk construction work

Tick every category the job involves. If none apply, a SWMS isn't legally required, but many builders still ask for one.

 Risk of a fall of more than 2 metres Work on a telecommunication tower  Demolition of load-bearing or structural elements  Disturbing asbestos  Structural alterations needing temporary support  In or near a confined space  Shaft or trench deeper than 1.5 m, or a tunnel  Use of explosives  On or near pressurised gas mains or piping  On or near chemical, fuel or refrigerant lines  On or near energised electrical installations  Contaminated or flammable atmosphere  Tilt-up or precast concrete  On or next to a road, railway or shipping lane in use  Where powered mobile plant is moving  Artificial extremes of temperature  In or near water with a risk of drowning  Diving work

3\. PPE, plant, licences and emergency

 Hard hat Safety glasses  Face shield  Hearing protection  Hi-vis clothing  Steel-cap boots  Work gloves  Cut-resistant gloves  Chemical-resistant gloves  Insulated gloves (rated)  P2 respirator  Fall-arrest harness  Sun protection (hat, long sleeves, SPF 50+)  Coveralls  Knee pads  Arc-rated clothing

Other PPE  Plant, tools and equipment Licences, tickets and training Emergency arrangements

4\. Job steps, hazards and controls

One row per step, in the order the work is done. Put each hazard and each control on its own line.

Add a step

5\. Monitoring and review How the control measures are monitored and reviewed

The download adds a worker sign-on table and an approval block for the principal contractor.

Download Word Save as PDF Clear the form

Your SWMS is downloading.

Next time, keep it on the job. In Fieldmox the SWMS sits on the job with the quote, schedule and photos, so whoever is on site can find it, and you're not digging through email when the builder asks for it.

[Book a meeting](https://www.fieldmox.com/book)

## SWMS law in Western Australia

Act

Work Health and Safety Act 2020 (WA)

Regulation

Work Health and Safety (General) Regulations 2022 (WA)

Regulator

[WorkSafe WA](https://www.worksafe.wa.gov.au)

### What to know in WA

-   WA's WHS laws replaced the old Occupational Safety and Health Act 1984. Older WA templates written under the OSH laws should be updated.
-   The 18 high risk construction work categories and the SWMS content rules match the national model.
-   WorkSafe WA publishes an information sheet on SWMS for high risk construction work.

## Work that needs a SWMS in WA

Western Australia uses the national list of 18 types of high risk construction work. A SWMS is required before any of them starts.

1.  1 Risk of a fall of more than 2 metres
2.  2 Work on a telecommunication tower
3.  3 Demolition of load-bearing or structural elements
4.  4 Disturbing asbestos
5.  5 Structural alterations needing temporary support
6.  6 In or near a confined space
7.  7 Shaft or trench deeper than 1.5 m, or a tunnel
8.  8 Use of explosives
9.  9 On or near pressurised gas mains or piping
10.  10 On or near chemical, fuel or refrigerant lines
11.  11 On or near energised electrical installations
12.  12 Contaminated or flammable atmosphere
13.  13 Tilt-up or precast concrete
14.  14 On or next to a road, railway or shipping lane in use
15.  15 Where powered mobile plant is moving
16.  16 Artificial extremes of temperature
17.  17 In or near water with a risk of drowning
18.  18 Diving work

What a SWMS must include, how to fill it in, and a worked example: [the full SWMS guide](https://www.fieldmox.com/templates/swms).

## SWMS templates by trade

-   [Working at heights](https://www.fieldmox.com/templates/swms/working-at-heights)
-   [Electrical](https://www.fieldmox.com/templates/swms/electrical)
-   [Carpentry](https://www.fieldmox.com/templates/swms/carpentry)
-   [Plumbing](https://www.fieldmox.com/templates/swms/plumbing)
-   [Air conditioning](https://www.fieldmox.com/templates/swms/air-conditioning)
-   [Solar installation](https://www.fieldmox.com/templates/swms/solar)
-   [Roofing](https://www.fieldmox.com/templates/swms/roofing)
-   [Scaffolding](https://www.fieldmox.com/templates/swms/scaffolding)
-   [Concreting](https://www.fieldmox.com/templates/swms/concreting)
-   [Excavation](https://www.fieldmox.com/templates/swms/excavation)
-   [Demolition](https://www.fieldmox.com/templates/swms/demolition)
-   [Painting](https://www.fieldmox.com/templates/swms/painting)
-   [Tiling](https://www.fieldmox.com/templates/swms/tiling)
-   [Landscaping](https://www.fieldmox.com/templates/swms/landscaping)
-   [Builders clean](https://www.fieldmox.com/templates/swms/cleaning)
-   [Pest control](https://www.fieldmox.com/templates/swms/pest-control)

Other states: [SWMS template NSW](https://www.fieldmox.com/templates/swms/nsw) · [SWMS template QLD](https://www.fieldmox.com/templates/swms/qld) · [SWMS template VIC](https://www.fieldmox.com/templates/swms/vic) · [SWMS template SA](https://www.fieldmox.com/templates/swms/sa)

## SWMS questions for WA

Is a SWMS required in WA?

Yes, for high risk construction work. Under WA's WHS (General) Regulations 2022, a SWMS must be prepared before the work starts and the work must follow it.

Can I still use an old WA safety template from before 2022?

Check it first. Templates written under the old OSH Act may use outdated terms and miss sections the WHS laws require, such as how controls are monitored and reviewed. The builder on this page follows the current requirements.

How long do I keep a SWMS in WA?

Until the high risk construction work is finished, or for at least 2 years after a notifiable incident that happened during the work.

## Attach the SWMS to every job

Fieldmox runs quotes, scheduling, the technician app and invoicing in one place. Save the SWMS on the job next to the quote and photos, so it's there when the builder asks for it, and add "SWMS read and signed" to the visit checklist your crew ticks off on their phone before they start.

[Book a meeting](https://www.fieldmox.com/book)
