# Painting SWMS Template (Free, Australia) | Fieldmox

> Free painting SWMS for Australian painters: heights, lead paint, sanding dust, spray painting and solvents. Edit online, download Word or PDF.

Source: https://www.fieldmox.com/templates/swms/painting

1.  [Home](https://www.fieldmox.com/)
3.  [Templates](https://www.fieldmox.com/templates)
5.  [SWMS template](https://www.fieldmox.com/templates/swms)
7.  Painting

Free template · Australia · Updated November 2026

# Painting SWMS template

Painters need a SWMS when the job has a risk of falling more than 2 metres, such as a two-storey exterior, or other high risk construction work. This one covers set-up, pressure washing, surface prep and lead paint, access at height, brush, roller and spray application, and clean-up. Edit it for your job and download it.

Download Word Save as PDF [Edit it online](https://www.fieldmox.com/templates/swms?trade=painting#builder)

Free, no sign-up. The download adds a worker sign-on table and principal contractor approval.

## The painting SWMS

7 job steps, from set-up to pack-down. Every step lists its hazards, risk before and after, and the controls.

Work activity

Exterior and interior repaint of a two-storey house: pressure washing, surface preparation, and brush, roller and spray application, including work at height of more than 2 metres.

High risk construction work

-   Risk of a fall of more than 2 metres

PPE

Safety glasses, Steel-cap boots, Chemical-resistant gloves, P2 respirator, Fall-arrest harness, Sun protection (hat, long sleeves, SPF 50+), Coveralls

Plant and equipment

-   Mobile scaffold or EWP for upper storey
-   Platform and extension ladders (industrial rated)
-   Pressure washer
-   Airless spray unit
-   Sanders with dust extraction, HEPA vacuum
-   Drop sheets and paint storage

Licences and training

-   General construction induction (White Card)
-   Painting licence or registration where the state requires it
-   EWP training for the unit used
-   Lead-safe work training (recommended for pre-1970 homes)

Job steps, hazards, risk ratings and control measures

#

Job step

Hazards

Risk

Control measures

Residual

Responsible

1

Set up and protect the work area

-   Trip hazards from drop sheets and hoses
-   Occupants, children and pets
-   Public walking past

Low

-   Agree work areas and times with the occupants; keep children and pets away
-   Tape down drop sheets and run hoses along edges
-   Every worker reads and signs this SWMS

Low

Supervisor

2

Pressure wash surfaces

-   Injection injury from the high-pressure jet
-   Water near electrical fittings
-   Slips

Medium

-   Never point the wand at people; release pressure before changing nozzles
-   Cover outdoor power points and lights; use an RCD-protected supply
-   Wear boots with good grip and eye protection

Low

All workers

3

Prepare surfaces and deal with old paint

-   Lead dust from old paint
-   Sanding dust
-   Asbestos in old eaves and sheeting

High

-   Test old paint for lead on homes built before 1970
-   Use wet scraping and wet sanding or sanders with HEPA extraction; no dry sanding or burning of lead paint
-   Wear a P2 respirator and coveralls; wash before eating
-   Don't sand or drill fibre cement sheeting on pre-1990 homes until it is confirmed asbestos-free

Medium

Supervisor

4

Access upper walls, eaves and gutters

-   Falls of more than 2 metres
-   Ladder slipping
-   Overhead powerlines

High

-   Use a mobile scaffold or EWP for upper storey work rather than extension ladders
-   Lock castors and fit guardrails on mobile scaffold
-   Ladders only for short tasks; secure them and keep 3 points of contact
-   Keep ladders and tools clear of powerlines

Medium

All workers

5

Apply paint by brush and roller

-   Solvent vapours indoors
-   Repetitive strain
-   Paint in eyes

Medium

-   Use water-based products where possible; open windows and use fans
-   Use extension poles to reduce overhead reaching; swap tasks regularly
-   Wear safety glasses for ceilings

Low

All workers

6

Spray painting

-   Inhaling spray mist and vapours
-   Fire from solvent vapours
-   Injection injury from airless spray tips
-   Overspray onto neighbours and cars

High

-   Wear a respirator with the cartridge the SDS specifies; ventilate enclosed areas
-   Remove ignition sources; no smoking
-   Engage the gun's trigger lock when not spraying and release pressure before cleaning the tip
-   Mask surrounding areas; don't spray in wind

Medium

Sprayer

7

Clean up and store products

-   Chemical spills
-   Paint entering stormwater
-   Oily rags catching fire

Medium

-   Wash water-based tools into a container or sewer point, never the stormwater
-   Store solvents sealed and away from heat
-   Lay oil-soaked rags flat to dry or keep them in a sealed metal container with water

Low

All workers

## Rules that apply to painting work

-   Homes built before 1970 often have lead paint. Test before sanding, use wet methods, and never burn it off.
-   Spray painting with solvent-based products needs ventilation and a respirator with the right cartridge for organic vapours.
-   Read the safety data sheet (SDS) for each product and keep it on site.
-   Don't wash brushes or tip paint into stormwater drains.

## Questions

Do painters need a SWMS?

Only when the work is high risk construction work, which for painters is usually a risk of falling more than 2 metres. Single-storey interior work generally doesn't need one, but builders and strata managers often ask for one anyway.

How do I know if old paint contains lead?

Assume it might on homes built before 1970. Use a lead test kit or send a sample to a lab before sanding or scraping. If lead is present, use wet methods, contain the dust and clean up with a HEPA vacuum.

What respirator do I need for spray painting?

The one the product's safety data sheet specifies. For solvent-based paints that's usually a half-face respirator with combined organic vapour and particulate cartridges. A P2 dust mask alone doesn't protect against vapours.

Is this painting SWMS free to use?

Yes. Download it as Word or PDF with no sign-up, or open it in the online builder to change the steps and add your business details first. Check it against your own job and site before you use it.

## More SWMS templates

-   [Working at heights](https://www.fieldmox.com/templates/swms/working-at-heights)
-   [Electrical](https://www.fieldmox.com/templates/swms/electrical)
-   [Carpentry](https://www.fieldmox.com/templates/swms/carpentry)
-   [Plumbing](https://www.fieldmox.com/templates/swms/plumbing)
-   [Air conditioning](https://www.fieldmox.com/templates/swms/air-conditioning)
-   [Solar installation](https://www.fieldmox.com/templates/swms/solar)
-   [Roofing](https://www.fieldmox.com/templates/swms/roofing)
-   [Scaffolding](https://www.fieldmox.com/templates/swms/scaffolding)
-   [Concreting](https://www.fieldmox.com/templates/swms/concreting)
-   [Excavation](https://www.fieldmox.com/templates/swms/excavation)
-   [Demolition](https://www.fieldmox.com/templates/swms/demolition)
-   [Tiling](https://www.fieldmox.com/templates/swms/tiling)
-   [Landscaping](https://www.fieldmox.com/templates/swms/landscaping)
-   [Builders clean](https://www.fieldmox.com/templates/swms/cleaning)
-   [Pest control](https://www.fieldmox.com/templates/swms/pest-control)

By state: [SWMS template NSW](https://www.fieldmox.com/templates/swms/nsw) · [SWMS template QLD](https://www.fieldmox.com/templates/swms/qld) · [SWMS template VIC](https://www.fieldmox.com/templates/swms/vic) · [SWMS template WA](https://www.fieldmox.com/templates/swms/wa) · [SWMS template SA](https://www.fieldmox.com/templates/swms/sa) · [Blank SWMS template](https://www.fieldmox.com/templates/swms)

## Attach the SWMS to every job

Fieldmox runs quotes, scheduling, the technician app and invoicing in one place. Save the SWMS on the job next to the quote and photos, so it's there when the builder asks for it, and add "SWMS read and signed" to the visit checklist your crew ticks off on their phone before they start.

[Book a meeting](https://www.fieldmox.com/book)
