# SWMS Template NSW (Free, Word & PDF, 2026) | Fieldmox

> Free SWMS template for NSW, built to the NSW WHS Regulation: all 18 high risk construction work categories and worker sign-on. Download Word or PDF.

Source: https://www.fieldmox.com/templates/swms/nsw

1.  [Home](https://www.fieldmox.com/)
3.  [Templates](https://www.fieldmox.com/templates)
5.  [SWMS template](https://www.fieldmox.com/templates/swms)
7.  NSW

Free template · New South Wales · Updated November 2026

# SWMS template for NSW

In NSW, a SWMS is required before any high risk construction work starts, under the Work Health and Safety Regulation (NSW). It must name the high risk work, the hazards and risks, the control measures, and how those controls are put in place, monitored and reviewed. Use the free builder below, or start from a trade example.

[Fill it in online](#builder)

## Fill in your NSW SWMS

Start blank or from a trade example, then download Word or PDF. Free, no sign-up.

Start from Blank SWMS Working at heights SWMS exampleElectrical SWMS exampleCarpentry SWMS examplePlumbing SWMS exampleAir conditioning SWMS exampleSolar installation SWMS exampleRoofing SWMS exampleScaffolding SWMS exampleConcreting SWMS exampleExcavation SWMS exampleDemolition SWMS examplePainting SWMS exampleTiling SWMS exampleLandscaping SWMS exampleBuilders clean SWMS examplePest control SWMS example Loads a filled-in example for that trade. Your business details are kept.

Download Word Save as PDF

Free, no sign-up. Your draft saves in this browser as you type.

1\. Business and job details

Business name  ABN  Business address  Business phone  Principal contractor  Site address  Supervisor responsible  Supervisor phone  Prepared by  Date prepared  Review date  Work activity

2\. High risk construction work

Tick every category the job involves. If none apply, a SWMS isn't legally required, but many builders still ask for one.

 Risk of a fall of more than 2 metres Work on a telecommunication tower  Demolition of load-bearing or structural elements  Disturbing asbestos  Structural alterations needing temporary support  In or near a confined space  Shaft or trench deeper than 1.5 m, or a tunnel  Use of explosives  On or near pressurised gas mains or piping  On or near chemical, fuel or refrigerant lines  On or near energised electrical installations  Contaminated or flammable atmosphere  Tilt-up or precast concrete  On or next to a road, railway or shipping lane in use  Where powered mobile plant is moving  Artificial extremes of temperature  In or near water with a risk of drowning  Diving work

3\. PPE, plant, licences and emergency

 Hard hat Safety glasses  Face shield  Hearing protection  Hi-vis clothing  Steel-cap boots  Work gloves  Cut-resistant gloves  Chemical-resistant gloves  Insulated gloves (rated)  P2 respirator  Fall-arrest harness  Sun protection (hat, long sleeves, SPF 50+)  Coveralls  Knee pads  Arc-rated clothing

Other PPE  Plant, tools and equipment Licences, tickets and training Emergency arrangements

4\. Job steps, hazards and controls

One row per step, in the order the work is done. Put each hazard and each control on its own line.

Add a step

5\. Monitoring and review How the control measures are monitored and reviewed

The download adds a worker sign-on table and an approval block for the principal contractor.

Download Word Save as PDF Clear the form

Your SWMS is downloading.

Next time, keep it on the job. In Fieldmox the SWMS sits on the job with the quote, schedule and photos, so whoever is on site can find it, and you're not digging through email when the builder asks for it.

[Book a meeting](https://www.fieldmox.com/book)

## SWMS law in New South Wales

Act

Work Health and Safety Act 2011 (NSW)

Regulation

Work Health and Safety Regulation (NSW)

Regulator

[SafeWork NSW](https://www.safework.nsw.gov.au)

Regulator's own template

[SafeWork NSW SWMS template (Template 5)](https://www.safework.nsw.gov.au/your-industry/construction/house-construction/housing-industry-site-safety-pack/hissp-accodion/your-safe-work-method-statement-swms)

### What to know in NSW

-   NSW follows the national model WHS laws, so the 18 high risk construction work categories and the SWMS content rules are the same as in Queensland, WA and SA.
-   The principal contractor must take reasonable steps to get a copy of your SWMS before the work starts, so builders will ask for it at induction.
-   SafeWork NSW publishes its own SWMS template as part of the Housing Industry Site Safety Pack (Template 5).

## Work that needs a SWMS in NSW

New South Wales uses the national list of 18 types of high risk construction work. A SWMS is required before any of them starts.

1.  1 Risk of a fall of more than 2 metres
2.  2 Work on a telecommunication tower
3.  3 Demolition of load-bearing or structural elements
4.  4 Disturbing asbestos
5.  5 Structural alterations needing temporary support
6.  6 In or near a confined space
7.  7 Shaft or trench deeper than 1.5 m, or a tunnel
8.  8 Use of explosives
9.  9 On or near pressurised gas mains or piping
10.  10 On or near chemical, fuel or refrigerant lines
11.  11 On or near energised electrical installations
12.  12 Contaminated or flammable atmosphere
13.  13 Tilt-up or precast concrete
14.  14 On or next to a road, railway or shipping lane in use
15.  15 Where powered mobile plant is moving
16.  16 Artificial extremes of temperature
17.  17 In or near water with a risk of drowning
18.  18 Diving work

What a SWMS must include, how to fill it in, and a worked example: [the full SWMS guide](https://www.fieldmox.com/templates/swms).

## SWMS templates by trade

-   [Working at heights](https://www.fieldmox.com/templates/swms/working-at-heights)
-   [Electrical](https://www.fieldmox.com/templates/swms/electrical)
-   [Carpentry](https://www.fieldmox.com/templates/swms/carpentry)
-   [Plumbing](https://www.fieldmox.com/templates/swms/plumbing)
-   [Air conditioning](https://www.fieldmox.com/templates/swms/air-conditioning)
-   [Solar installation](https://www.fieldmox.com/templates/swms/solar)
-   [Roofing](https://www.fieldmox.com/templates/swms/roofing)
-   [Scaffolding](https://www.fieldmox.com/templates/swms/scaffolding)
-   [Concreting](https://www.fieldmox.com/templates/swms/concreting)
-   [Excavation](https://www.fieldmox.com/templates/swms/excavation)
-   [Demolition](https://www.fieldmox.com/templates/swms/demolition)
-   [Painting](https://www.fieldmox.com/templates/swms/painting)
-   [Tiling](https://www.fieldmox.com/templates/swms/tiling)
-   [Landscaping](https://www.fieldmox.com/templates/swms/landscaping)
-   [Builders clean](https://www.fieldmox.com/templates/swms/cleaning)
-   [Pest control](https://www.fieldmox.com/templates/swms/pest-control)

Other states: [SWMS template QLD](https://www.fieldmox.com/templates/swms/qld) · [SWMS template VIC](https://www.fieldmox.com/templates/swms/vic) · [SWMS template WA](https://www.fieldmox.com/templates/swms/wa) · [SWMS template SA](https://www.fieldmox.com/templates/swms/sa)

## SWMS questions for NSW

Is a SWMS a legal requirement in NSW?

Yes, for high risk construction work. Under the NSW WHS Regulation, the business doing the work must prepare a SWMS (or make sure one has been prepared) before the work starts, and make sure the work follows it.

Does SafeWork NSW have a free SWMS template?

Yes. SafeWork NSW publishes a SWMS template in Word and PDF as Template 5 of its Housing Industry Site Safety Pack. The builder on this page covers the same content and adds trade examples you can edit online.

How long do I keep a SWMS in NSW?

Until the high risk construction work it covers is finished. If a notifiable incident happens during that work, keep it for at least 2 years after the incident.

## Attach the SWMS to every job

Fieldmox runs quotes, scheduling, the technician app and invoicing in one place. Save the SWMS on the job next to the quote and photos, so it's there when the builder asks for it, and add "SWMS read and signed" to the visit checklist your crew ticks off on their phone before they start.

[Book a meeting](https://www.fieldmox.com/book)
